multi-channal and porous Ultrafiltration Membrane filter

1.solid-liquid separation. 2.Al2O3+ZrO2 3.CE,ISO900 4.low cost and long working life 5.largest supplier

Ceramic membrane is a porous fine ceramic filter which is sintered from Alumina, Titania or Zirconia under ultra high temperature. Ceramic membrane normally has an asymmetrical structure with porous support active membrane layer. The macro porous support ensures the mechanical resistance while the active layer functions separation ranging from Microfiltration, Ultrafilatration and even Nanofiltration (from 10μm down to 1KD).

Ceramic Membrane always runs at a CROSS FLOW FILTRATION mode. The turbid fluid goes through membrane layer inside the single channel or a multichannel at a high velocity. Driven by TransMembrane Pressure(TMP), the clean liquid with micro-molecule pass through the membrane layer vertically to permeation, the solid and big molecule is rejected in retentate. The feed fluid is thus clarified, concentrated and purified

1.Ultrafiltration membrane

2. filter Series numbers: CMF19033, CMF09060, CMF19040, CMF19060, CMF37036

3. Pore size: 50/20nm

4.Raw material: 99% α-Al2O3/ ZrO2

5.Outside diameter: 25, 30, 40mm

6.Total length: 1178,1016,1000mm

7.Permeate direction: inside to outside

8.pH range: 0-14

9.Temperature: <150 degrees